GROOVE WORKS australia

   

 

REGA TRANSFORMATION KIT

This is a high performance upgrade kit for the Rega Planar range of turntables, which we guarantee will significantly improve the sound quality of this superb audiophile record deck.
The kit comprises the following items:

1. Platter damping ring (Peripheral wave trap). 10mm deep to fit Rega glass platter perfectly. This absorbs vibrations / resonances in the platter and improves rotational stability.

2. Brand new Rega drive belt. Drive belts need replacing every couple of years - if your belt is even slightly worn the deck may still run perfectly to speed, but dynamic information will be smeared. It will sound 'tired' and lacklustre. This is a genuine Rega belt - BEWARE of non-original belts - we have not found one yet that does not degrade performance...

3. Ultimate Turntable Bearing Oil. If your turntable has not had a service for a few years it needs an oil change! This is the best bearing oil available - known to Audiophiles as 'Black Oil' it contains Molybdenum Disulfide and Graphite. Makes the turntable bearing quieter, more efficient and drastically reduces wear

4. Motor Vibration Absorber (MVA). This fits tightly around the motor casing effectively reducing the vibration generated by the motor, which would otherwise be transmitted to the plinth or via the belt to the platter.

5. HiFi News Cartridge Alignment Protractor. Accurate and hard wearing, this will allow you to align the cartridge perfectly in the headshell to achieve the minimum possible tracking error over the entire surface of the disc. An incorrectly positioned cartridge causes tracking distortion and will irretrievably damage your vinyl.

6. Cartridge Mounting Kit. Very high quality non-magnetic stainless steel hex head fixings, so you can mount the cartridge securely in the headshell. Cartridges mounted with poor quality fixings (such as those packaged with the cartridge) will cause loss of information. Complete with allen wrench & enough fixings to mount two cartridges.

7. Pro Stylus Cleaning Fluid with applicator brush. Effectively cleans the muck off the stylus (and behind it, where it builds up). Use this regularly for best results. You can also use this fluid to clean the belt, motor pulley & driving surfaces.

The kit comes with full instructions, and we guarantee you will be amazed at the transformation.

Price: $98.95 ( includes GST and shipping within Australia )

Go back to top